5 Ghost 2 Immobiliser Reviews Projects For Any Budget
Ghost 2 ImmobiliserGhost is an electronic security system that wirelessly safeguards your car from key-cloning and hacking. It connects with the ECU unit via CAN data networks and is silent, which means it can't be detected.
You can only disable it by entering the sequence of buttons (like PIN code) you have programmed into your car by using buttons on the steering wheel and center console.
Protects Your Car from Theft
Car theft is on the rise, and cars are taken in a matter of minutes. It is essential that car owners think about the extra security measures they can adopt. Immobilisers are one of the best and most established ways of keeping your vehicle safe. Ghost immobilisers are an excellent option because they are small, hidden inside the wires of your vehicle and don't emit radio frequency signals. This means they are untraceable and can be installed without affecting the vehicles CAN bus system.
Unlike other immobilisers that rely on keypad input, tags or a specific sequence of keys to disarm them the ghost immobiliser that is located near me is only disabled by the pin code that was set up by us at the time of installation. This unique sequence of disarming uses the buttons that are already within your vehicle, such as the ones on the steering wheel, doors or centre console to prevent anyone from starting their engine and driving away your vehicle. This makes it impossible for thieves to clone your key or use jamming/spoofing equipment that can disable standard immobilisers.
A ghost immobiliser prevent your car from being driven and parked, it also prevents the car from being stripped to make parts. This is a rising issue in the UK due to the growing popularity of these types of cars. It can happen in less than a minute. Ghost immobilisers from TTW can be easily programmed to guard your vehicle from these types of attacks.
If you have our Ghost 2 immobiliser in my area it will stop your car being stolen from the service station or if it is being driven by an employee while your car is on a lift at the garage. The Ghost can be set to Service/Valet Mode, which allows you, the consumer, to enter a unique button combination.
If you would like to know more about our ghost immobilisers, or need a free quote, contact us now. We are happy to assist you and give you peace of mind knowing that your vehicle will be protected at all time.
There isn't a key fob or LED to reveal its place of residence.
Secure your vehicle from the newest type of theft using this non-detectable immobiliser which is integrated into your car's CAN data network. Ghost is distinct from other CAN-immobilisers from the aftermarket that depend on keys or LED indicators to perform the function. Instead, it uses the buttons on your vehicle's standard factory controls, such as those on the steering wheel or door panels. This means that a hidden pin code is created which must be entered prior to when your vehicle starts, making it completely undetectable to thieves.
The developers of the CAN-BUS device have also added additional security measures to guard against the device being hacked or by-passed. It also has CANBUS blocking and physical immobiliser cuts. This means that even the keys are stolen the criminal won't be able to drive off with your pride and Joy.
Installing the CAN-BUS into your vehicle is a simple and quick process that takes only 30 minutes. We will have someone from our team in your area to arrange an appointment time and location that works for your needs. After your vehicle is fitted with a security system, you will be provided with a registration code and unique security codes that you can use on your phone and app. This makes it easier to use and give you full control over the security of your car.
The system is compatible with most modern cars, but should you own a vintage or special-purpose vehicle Contact us to confirm compatibility. The Ghost Immobiliser 2, including installation is priced at APS449 The car will be added to the International Security Register if installed by one of our approved installers. If you have any queries do not hesitate to contact us with our friendly team. We look forward to receiving your call soon.
Easy to set up and program.
Immobilisers are a feature of many modern vehicles to prevent theft or hot-wiring. Immobilisers are more effective than physical deterrents, such as wheel locks and steering wheel clamps due to the fact that they are integrated into your vehicle.
The system connects directly to car ghost immobiliser your vehicle's CAN data network and prevents the vehicle from starting until you input a specific code. The unit is sealed, and so small it can be positioned almost anywhere in your car without the requirement for additional wiring. It does not emit radio frequency signals, so it isn't detected by scanners or other code-grabbing equipment.
Ghost utilizes your vehicle's current buttons on the steering wheel, door panels and centre console to create a customisable disarm sequence (like PIN codes) which must be entered to authorize the start-up of your car. The pin code sequence can be altered at any time and is dependent on four to twenty button presses. You can even put your vehicle in Service/Valet mode, so that it is able to be operated but the vehicle will not start and drive. This will ensure that your vehicle is safe when you bring it in for service or valet parking and also that the mechanic is unable to access your pin code to disable your system.
You can make use of our app to set temporary pins for your ghost device in the event that you plan to be away from your car for a prolonged period of time like a holiday or work trip. You can manually enter your pin when driving the vehicle.
The CAN bus immobiliser can also be connected to remote key fobs and tracker (Brand dependent) which will have precedence over the ghost system. This can provide additional security if your vehicle is stolen or if your keys get lost.
If you're looking for a method to safeguard your vehicle from key-cloning and hacking, contact us now to find out what we can do to help. We provide our services across the UK, as well as in our own installation centre in Derby.
Service/Valet mode
Modern vehicles have sophisticated eco systems with stop/start that require the right inputs to function correctly. For example the voltage of the battery and temperatures of the engine, as well as external temperatures, and which electrical systems are active. Sometimes, these can cause issues and are often difficult to determine if it is Ghost related or not. This is especially relevant if your vehicle was recently serviced or valet-parked. If this is the case you can switch to the ghost service mode, which allows the vehicle to start and drive without the need for a pin code. This can be helpful when your car is being serviced or valet at an independent garage.
To enter service mode simply press the service button five times. The indicator signal will flash twice to show that the service mode has been activated. It is possible to exit service mode at anytime by entering a PIN code. Once you exit the service mode then the Ghost immobiliser will return to normal operation.
This is a very discreet system that works by communicating with the vehicles ECU using the CAN data circuit, and connecting directly to the original vehicle buttons, and not using radio frequency signals as other immobilisers. This makes it virtually impossible for any other device or hacker to bypass the system. Even jamming devices which disguise codes from the original key fob will not have any impact on this.
It is an TASSA tested anti-theft device that meets the highest standards of protection. It also has a unique vehicle marking system that is linked to the international security register which is an insurance company requirement.
The ghost immobiliser is a small unit that can be easily hidden within your vehicle's factory wiring. This makes it virtually impossible for thieves. It is a sealed unit that is so small, it can be installed in a variety of different places in the vehicle, such as under the dashboard or on the steering wheel.
The system makes use of buttons on your vehicle, such as those on the steering wheel, door panels or on the centre console to let you create a an unique and dynamic disarm sequence of up to 20 presses that must be completed to start your vehicle. It can be entered by anyone who has your unique pin code. it is safe and secure for you and your family, colleagues, or friends to use.